Attention! The Canadian RSS-102 Issue 6 standard has been enforced since December 15th, 2024

On December 15th, 2023, the Canadian Department of Innovation, Science and Economic Development (ISED) issued RSS-102 Issue 6, namely "Radio Frequency (RF) Exposure Compliance of Radio Communication Equipment (All Frequency Bands)". RSS-102 is a standard specification for evaluating the radiation exposure compliance of wireless communication equipment in close use, which was enforced on December 15th, 2024. In other words, from December 15, 2024, ISED Canada will enforce the new version of the standard and only accept authentication applications based on RSS-102 Issue 6.

The standard points are as follows:

1. The new regulations have lowered the power threshold of SAR exemption test (frequency band above 2450MHz): < 3mW, and the subsequent BT cannot be exempted basically, so it is necessary to increase the BT SAR test;

2. The new regulations confirm the SAR test distance of mobile phones: the test distance of the Body Worn part must be consistent with that of Hotspot and less than or equal to 10mm;

3. The new regulations add 0mm Hand SAR test for mobile phone authentication, and the test volume is increased by nearly 50% compared with the old regulations, so the test time and cycle need to be increased simultaneously.

RSS-102 Issue 6 supporting documents

◆ RSS-102.SAR.MEAS Issue 1

Measurement procedure for evaluating compliance of specific absorption rate (SAR) according to RSS-102.

◆ RSS-102.NS.MEAS Issue 1

Measurement procedure for evaluating compliance of nerve stimulation (NS) according to RSS-102.

◆ RSS-102.NS.SIM Issue 1

A simulation program for evaluating the compliance of nerve stimulation (NS) according to RSS-102.

◆ RSS-102.IPD.MEAS Issue 1

Measurement procedure for evaluating the compliance of incident power density (IPD) according to RSS-102.

◆ RSS-102.IPD.SIM Issue 1

A simulation program for evaluating the compliance of incident power density (IPD) according to RSS-102.

◆ In addition, there are other measurement and simulation programs for parameters such as absorption power density (APD) under development.

Warm tips

ZRLK has been focusing on the testing and certification of consumer electronic and electrical products for 20 years, always paying attention to the changes of laws and regulations in various countries, and providing customers with one-stop testing and certification services to ensure that your products enter the target market quickly. If you want to know more about the requirements of ISED certification in Canada or have products that need ISED certification in Canada, please feel free to contact us, and our engineers will serve you as soon as possible!