FCC-ID certification application process of smart bracelet——ZRLK

Smart bracelet is a wearable intelligent device. Through the smart bracelet, users can record the exercise and sleep in daily life; Some also have real-time data such as diet, which can guide healthy life through data. But generally, such smart electronic products need to go through the U.S. FCC - ID certification if they want to export to the U.S. market.

What is FCC-ID certification?

The full name of the FCC certification in the United States is the Federal Communications Commission, which was established by COMMUNICATION ACT in 1934 as an independent agency of the United States government and is directly responsible to the Congress. FCC coordinates domestic and international communications by controlling radio broadcasts and cables. It involves more than 50 states in the United States, Colombia and the United States to ensure the safety of radio and wire communication products related to life and property. FCC certification is divided into two types: FCC SDOC (wired product) and FCC ID (wireless product).

FCC - ID is one of the mandatory FCC certification modes in the United States and is applicable to wireless products. Products with wireless transmission frequency, such as Bluetooth devices, WiFi devices, wireless alarm devices, radio reception and transmission devices, telephones, computers, etc., need to apply for FCC-ID certification. The certification of wireless products is directly approved by FCC TCB, and can be found on the official website of FCC in the United States.

Requirements for FCC-ID certification test prototype

1. At least one qualified prototype shall be provided for each model applied for certification (2 or more are recommended)

2. The provided prototype must be officially qualified, and its internal electrical structure and appearance must be consistent with the exported batch prototype

3. The trademark and model on the prototype must be clearly visible

Information to be prepared for the application for FCC-ID certification of smart bracelet

1. English instructions

2. Circuit schematic diagram

3. English BOM (ordinary Bluetooth WIFI products do not need to be provided, 2G/3G/4G and other products must be provided)

4. English function block diagram

5. Description of working principle diagram in English

6. Antenna specification (some organizations need to provide it)

7. Label sample confirmation

FCC-ID certification process of smart bracelet

1. To apply for FCC - ID certification for the first time, it is necessary to register FCC - FRN and establish company files for FCC - ID declaration;

2. Provide products and product-related information to our laboratory;

3. The laboratory conducts data review and product testing, and issues a test report if the test is qualified (if the test is unqualified, rectify and retest);

4. Submit the test report to the FCC - TCB organization for review, and submit the report to the FCC Management Center for publishing on the website;

5. After certification, the certificate can be obtained, and the product information can be found through the ID number on the FCC official website of the United States.

Please contact our company ZRLK to handle the FCC-ID certification of smart bracelet. We will provide you with professional and efficient testing and certification services, with preferential prices and considerate services. If you provide us with product pictures and specifications, we will give corresponding cycles, quotations and specific plans according to your products. Welcome to call for consultation!